Wet plate collodion photography and Wet Plate Cameras

Entertainment solderx August 7, 2016 0 3
Wet Plate Photography or settling called Wet Plate Collodion photography, is an old-fashioned form of photography, which has become suddenly hip again after the year 2000. If you're a Wet Plate Camera you can take very nice pictures, which actually can not fail because of the nostalgic atmosphere. Almost every photo Wet Plate has something. The first Wet Plate photos were taken in 1851. The Wet Plate camera was also the first camera in which use was made of a homemade negative, on a glass plate. Before Wet Plate Photography was every picture was a unique imprint which only one existed. There was the Wet Plate period namely a negative of the first pictures since the image on each photo was captured directly onto photosensitive paper, and then the light-sensitive paper was developed. Print There were no negatives and a photo again could not. In 1851 the Wet Plate technology was invented by Englishman Frederick Scott Archer. The Invention of the Wet Plate Photography negatively changed forever. Although Law plate collodion photography to mention old-fashioned, it is now again fully. More and more people Wet Plate pictures, because it is such a huge fun activity and also because you look very nice pictures with fondness. Wet Plate pictures is not difficult. Everyone can do it because it is purely a question of a suitable drop model in a setting that you like. But the Wet Plate Process is technically somewhat laborious, as you prepare for each of Wet Plate or pull out fifteen minutes. The chemicals you work with are not dangerous and therefore requires reasonable organization, but then you have something. Wonderfully atmospheric old photos, of modern people and things.

Wet Plate Cameras

Wet Plate pictures taken with glass plates on which layers are deposited, gelatin silver bromide. Wet plate collodion photography brings the familiar dark yellow monochrome on effect. Details can be sharp, and you keep a negative on glass on which you can reuse to print photos. Wet Plate photography was one of the earliest forms of photography in which a negative could be made. People who nowadays Wet Plate photos with a Wet Plate Cameras have breathed new life into the same technique. The old Wet Plate Cameras are still for sale, but there are also obtaining new Wet Plate cameras, which operate exactly as the old. Wet Plate photographer Quinn Jacobson shows on YouTube to see how he makes a negative and a positive, translucent glass and black glass. He proceeds as follows:
  • Cut glass. He cuts glass for the negative to the desired size. He uses black glass and translucent glass. The translucent glass for the negative, the black glass for the positive
  • The edges of the glass gently sand with a stone or sandpaper, to prevent you cut your hands. Since cyanide is also used photography this process, it is especially important that you do not have wounds on your hands. Also, the abrasion causes the emulsion which can later make on the plate, will remain better seated and there are not so easily unwinds
  • Thoroughly clean the glass. This is very important because if the glass is not cleaned very good will come loose or collodion emulsion on the plate / flaking
  • Apply the collodion on the plate. This is simply poured from a bottle on the plate and well distributed over the glass plate. This takes some skill and affects the final print. The collodion is spread as evenly as possible over the platen. The remainder goes back into the vial.
  • Then the plate is a few minutes in a 'bad' silver nitrate.
  • The exposure to light of a Wet Plate can vary from a few seconds to tens of seconds or a few minutes or until. The person who makes the pictures can experiment with and the result on the photo depends on the light-sensitive layer on the glass, the exposure of the subject to photograph, and of course the exposure time. If a model is in the photo, it must sit still during the exposure time for the clearest results possible
  • To develop the Wet Plate you only need a short time but it is important that you know exactly when you stop setting, for the effect you want to achieve. Quinn Jacobson used for the fusing process potassium cyanide.
  • The plate is then rinsed with water

Original photo Wet Plate around 1865

Wet plate collodion photographs workshop

Wet Plate Cameras are offered regularly. As an old Wet Plate camera is looking, it is necessary that the camera is still working, but you can also buy new Wet Plate cameras. Wet Plate shooting is fun to do, the hardest part is the chemical process of glass to photograph. The processing of glass sheets to a light-sensitive plate, it is most of the work. Over time, you learn more and more, however, overexposure and techniques and as long as Wet Plate Collodion photography is a trend, it's definitely worth it to get going with it.

Itself a Wet Plate Camera

This, too, is possible. There are various manuals to make yourself a Wet Plate camera, because the principle is simple. In fact, the camera is in fact nothing more than a case where no light can come in with a lens or light transmission. A guide to making your own Wet Plate Cameras can be found on YouTube or elsewhere online.

Wet Plate Photography course

Sometimes there Wet Plate Photography workshops and courses. You will learn in a short time everything about the preparation, making the negative on a glass plate, photographing, fixing the negative and print your own Wet plate collodion photographs.